Godzilla Official Website | News, Monsters, Shop, & More

Izakaya Godzilla Bowl vs Mechagodzilla Patch: Care Steps

Izakaya Godzilla Bowl vs Mechagodzilla Patch: Care Steps

By Godzilla Official Website | News, Monsters, Shop, & More | Published: 2026-11-05

Category: 팁 및 관리

Two Godzilla exclusives, two very different care routines. Follow these ordered steps to wash the Izakaya bowl safely and iron or display the Mechagodzilla patch without damage.

Quick answer

Wash the Izakaya Godzilla Small Bowl by hand with mild soap and a soft sponge, and apply the Mechagodzilla Embroidered Patch with a low-to-medium iron and a pressing cloth. Keep both away from harsh abrasives and direct high heat.

Why these two exclusives need different routines

The bowl is a made-in-Japan ceramic-style piece with an original logo printed on it, so the print—not the bowl body—is the fragile part. The patch is an embroidered polyester and polyolefin iron-on, where the adhesive backing and raised threads are what you can damage.

That means the bowl routine is about gentle washing and drying, while the patch routine is about controlled heat and correct placement. Treating them the same way—dishwasher for the bowl, high iron for the patch—is the most common way collectors shorten the life of both.

When hand washing is non-negotiable

The catalog does not list the bowl as dishwasher-safe or microwave-safe, so hand washing is the safe default. If you use the bowl for oily snacks or side dishes, a short soak in warm mild soapy water loosens residue without scrubbing the printed logo.

For the patch, the iron-on backing is designed for fabric, not for repeated heat exposure. If you plan to move the patch between jackets or bags, consider sewing a few stitches at the corners after ironing rather than re-ironing it repeatedly.

Step-by-step care for the bowl and patch

  1. Hand wash the bowl promptly: Rinse the Izakaya Godzilla Small Bowl in warm water with a few drops of mild dish soap. Use a soft sponge or cloth and avoid abrasive pads, scouring powder, or bleach. Common mistake: letting food dry on the printed logo, which tempts you to scrub harder. If residue is stuck, soak for a few minutes instead of scrubbing.
  2. Dry the bowl fully before stacking: Rinse with clean water and dry with a soft towel, or let it air-dry upside down on a rack. Do not stack heavy dishes directly on the printed interior. Common mistake: putting the bowl away damp, which can leave water spots or a musty smell. Store the bowl with a felt or paper separator if you stack it.
  3. Prep the fabric before ironing the patch: Set the Mechagodzilla Embroidered Patch face-up on a flat, clean garment or bag panel. Heat the iron to a low-to-medium setting with no steam. Common mistake: ironing directly on the embroidered face without a pressing cloth, which can flatten or scorch the threads. Place a thin cotton cloth or parchment paper over the patch before the iron touches it.
  4. Press, don't drag: Press the iron firmly over the covered patch for about 10–15 seconds, then lift and repeat around the edges. Let the patch cool completely before testing adhesion. Common mistake: sliding the iron back and forth, which can shift the patch or smear the adhesive. If an edge lifts after cooling, cover it again and press for another 10 seconds.
  5. Display or store the patch wisely: For display, pin or sew the patch to a fabric board or jacket rather than leaving it in direct sunlight, which can fade embroidery over time. For storage, keep it flat in a dry drawer away from heat. Common mistake: storing the patch under heavy items that crush the raised embroidery. Avoid re-ironing the same patch more than once or twice; repeated heat weakens the backing.

Product facts

  • Izakaya Godzilla Small Bowl: Made in Japan with an original logo printed on the bowl. The printed logo is the delicate surface, so wash the inside and rim gently and avoid scrubbing the design.
    Izakaya Godzilla Small Bowl
    Izakaya Godzilla Small Bowl
  • Mechagodzilla Embroidered Patch: Iron-on backing made of polyester and polyolefin. The adhesive needs moderate heat to bond, but too much heat can melt or distort the backing, so use a pressing cloth and test first.
    Mechagodzilla Embroidered Patch
    Mechagodzilla Embroidered Patch

Shop Related Products

메카고지라 자수 패치

메카고지라 자수 패치

$3.60 $5.90

Shop Now
이자카야 고질라 작은 그릇

이자카야 고질라 작은 그릇

$15.25 $25.00

Shop Now